SEWER TREATMENT PLANTS
CitraBlast
Degreaser, deodorant - Contains no xylene, toluene, benzene, perchloroethylene, 1,1,1 trichloroethane or methylene chloride. This product has been developed with the help of “Mother Nature” to naturally clean, degrease and deodorize. Specifically formulated to meet or exceed today’s most demanding tests for efficiency and safety. This formulation contains natural citrus solvent extracted from the peel of oranges. This natural citrus solvent has extremely low toxicity, is nonflammable, nonconductive, noncorrosive and biodegradable. Yet, it possesses terrific solvency, grease dispersion and deodorant.
S-11 Sewer Solvent
This product is compounded from prime aluminum and caustic soda. It also contains a SAFETY DEPRESSANT to help eliminate hydrogen gas. Dissolves grease, hair, rags, paper and thin hairlike tree roots. S-11 is widely used by municipal sewage systems. For regular preventative maintenance, use 30# per manhole. Avoid smoking and breathing fumes generated by use of this product. Granular product - available in #60 pails only.
Lift Station Degreaser
This flooding lift station degreaser uses the natural cleaning power of Limonene from orange peel extract. The powerful solvent cleaner strips away heavy grease accumulations from walls and pumps and quickly dissolves grease balls. It deodorizes as it cleans, leaving the clean scent of fresh oranges. The special floating formula washes down the sides of the lift station as the water level rises and falls. The natural ingredients work quickly and effectively, without environmental hazards or disruption of biological treatment processes. Directions: Use approximately 1/2 gallon for each square foot of water surface. This special non-emulsifiable formula floats on the surface for continuous cleaning action.
LIFT STATION Degreaser Concentrate
NATURAL ~ FLOATING
This floating lift station degreaser uses the natural cleaning power of Limonene from orange peel extract. The powerful solvent cleaner strips away heavy grease accumulations from walls and pumps, and quickly dissolves grease balls. It deodorizes as it cleans and leaves the clean scent of fresh oranges.
Our special floating formula washes down the sides of the lift station as the water level rises and falls. The natural ingredients work quickly and effectively, without environmental hazards or disruption of biological treatment processes.
Use approximately 1/2 gallon for each square foot of water surface. This special non-emulsifiable
formula floats on the surface for continuous cleaning action.
Your BEST Source foe SAFE Sewage Treatment Products:
- Sewer Blocks
- Degreasers
- Enzymes
- Pressure Washers
- Foggers
- Flocculants
- Defoamers
- Deodorizers
- Sewer Solvents
- Proportioners
- Ground Products
- Chlorine Tabs
SEWER TRACING DYE
HEAVY DUTY CONCENTRATE
Available in Handy to use 16-ounce bottles with Easy Flip Top Lids Fluorescent Yellow/Green
- Flow origination studies
- Infiltration studies
- Septic system inspection
- Time-of-use studies
- Pollution investigations
- Maintenance analysis
This highly concentrated sewer tracing dye is formulated for use in all types of sewer flow studies and pollution investigations. It creates an intense fluorescent color for maximum visibility under a wide variety of conditions.
One gallon of dye will impart visible color to approximately 12,000 gallons of water. This dye contains biodegradable, non-toxic ingredients.
SEWAGE TREATMENT CHLORINE TABS
B.O.D. reduction
B.O.D., or Biochemical Oxygen Demand, is the quantity of oxygen required to oxidize the polluting substance to a biochemically inert material. As little as 1 part per million of chlorine may bring about a reduction of 2 to 3 ppm in B.O.D.. Calcium hypochlorite for this purpose may be added at virtually any point in the system.
To achieve maximum results in terms of desirable aerobic action and retardation of anaerobic decomposition, hyperchlorination should be complete. The treatment will still be of value, however, even if the amount of calcium hypochlorite applied is less than the total amount which could be utilized.
Odor Control
The most offensive odor encountered in sewage treatment is due to hydrogen sulfide. It is caused by the sulphate splitting bacteria normally present in sewage.
Hydrogen sulfide can be very effectively controlled by calcium hypochlorite hyperchlorination of the fresh sewage, which destroys the sulfide- producing bacteria. If the treatment of fresh sewage is not practical, calcium hypochlorite may be added at any point where the odors become objectionable. The amount required will, however, be increased, as the available chlorine in calcium hypochlorite will react not only with hydrogen sulfide, but also with other bacteria and organic material.
For a sulfide reduction of 1 ppm, from 8 to 10 ppm of available chlorine probably will be required.
Disinfection of sewage and wastewater effluent
Although every effort is usually made to locate treatment plants where effluent will not be the cause of problems, safe practice dictates that it should be treated to destroy harmful bacteria. Calcium hypochlorite has proven to be an effective and dependable means of destroying harmful bacteria in effluent. The amount required depends on the type of sewage to be treated. Raw sewage may require as much as 30 ppm available chlorine, while secondary treated sewage may need as little as 3 ppm. The disinfection of sewage effluent must be evaluated by determining the total number of coliform bacteria and/or fecal coliform bacteria, as determined by the Most Probable Number (MPN) procedure, of the chlorinated effluent. This must be reduced to or below the maximum permitted by the controlling regulatory jurisdiction.
On the average, satisfactory disinfection of secondary wastewater effluent can be obtained when the chlorine residual is 0.5 ppm after 15 minutes contact. Although chlorine residual is the critical factor in disinfection, the importance of correlating chlorine residual with bacterial kill must be emphasized. The MPN of the effluent, which is directly related to the water quality standards requirements, should be the final and primary standard and the chlorine residual should be considered an operating standard valid only to the extent verified by the coliform quality of the effluent.
DEODORANT GRANULES
Specifically formulated with a proprietary odor counteracting concentrate. Deodorant Granules neutralize obnoxious odors. One scoop counteracts odors in dumpsters, compactors, ash trays, waste baskets, etc. In addition to odor control, Deodorant Granules contain natural ingredients which have been proven to deter insects such as flies, bees, mosquitoes, etc. This product is non-toxic, making it user and environmentally friendly.
USED BY:
- Hospitals
- Universities
- Restaurants
- Office Buildings
- Hotels/Motels
- Pet Clinics
- Condominiums
- Day Care Centers
- Grocery Stores
- Nursing Homes
- Manufacturers
- Apartment Complexes
ENZYMATIC BLOCKS
Selective Non-Pathogenic Bacteria in a solid dissolving block
Enzymatic Blocks send grease-eating bacteria into grease traps, collection lines and lift stations. Each ounce contains over 16 billion Enzymatic Spores. Packaged in a specially designed mesh bag.
The time release of the block provides more consistent odor control / grease consumption than per
day metered systems.
- Works year round, not temperature sensitive
- Easy to use - No pumps to buy or maintain
- 100% Environmentally safe
- Each Block treats a 50 / Gallon Grease Trap
- Saves labor time and money.
USE ON:
- LIFT STATIONS
- GREASE TRAPS
- SEWAGE
- TREATMENT PLANTS
- DIGESTORS
- ANIMAL WASTE PITS
- RENDERING PLANTS
- PRODUCE PLANTS
- TROUGHS
MISCELLANEOUS SPECIALTY PRODUCTS
CROWNE SOLV #3
A highly concentrated industrial cleaner. Excellent for use in meat processing areas to effectively penetrate and lift most animal fats, other food residues, oil, grease, and soap scum. Dissolves and emulsifies soil from walls, floors, woodwork, painted surfaces, aircraft, autos, trucks, printing presses, leather or plastic upholstery, venetian blinds, stainless steel equipment, trash or garbage containers, table and counter tops. Degreases industrial equipment, motors, chassis and concrete. Available in regular formula or with pleasant sassafras scent.
Crowne Solv #3 is a ready-to-dilute, multiple purpose liquid acidic complex cleaning compound for removing rust, lime, scale and metal corrosion from equipment as well as from brass and copper. Used for cleaning rust and corrosion from most metals (even chrome and stainless steel), for removing light coatings of plaster and concrete, and for etching concrete. It’s THE replacement for muriatic acid and other strong acid compounds.
- Excellent for water meter cleaning
- Excellent for de-scaling cooling towers
- Excellent for boiler de-scaling
- Pleasant wintergreen scent
- Do not use on aluminum
Cationic Polymer Flocculent
Crowne Solv #3 quickly and effectively precipitates silt, clay, sludge & organic solids. This cationic polymer flocculent is designed for fast and efficient clarification of wastewater in industrial waste streams and municipal facilities. It uses high molecular weight polymers for rapid settling of solids and suspended debris. This formula is easy to handle and dispense and will help to increase the waste handling capacity of the system and reduce operating costs.
This biodegradable settling agent is nontoxic and will not harm fish or wildlife when used as directed. Typical applications include primary and secondary clarifiers, digesters, settling ponds or basins and reservoirs. Directions: Feed this settling agent into the stream prior to the clarifier or settling basin. Drip or pump into the system at a plant of strong agitation.
Use rates may vary from 50 ppm up to 300 ppm (2 quarts up to 3 gallons per 10,000 gallons of waste). For maximum economy and effectiveness, continuous drip application is recommended. For ponds or lagoons, drip or spray 10 to 20 gallons of settling agent per million gallons of water. Drip directly into waste stream or spray over surface to obtain even distribution of the fluorescent.
FIRE DEPARTMENTS
Fire Fighting Foam
Aqueous Film Forming Foam This fire lighting foam is a non- corrosive synthetic concentrate that produces a long-lasting dense foam that offers:
Superior Water Retention, Smothering & Cooling Vapor Suppression Designed for use on Class A and Class B (flammable liquid) fires when mixed with fresh water, sea water, or brackish water.
Directions: For use on Class A and Class B fires involving nonpolar liquids, such as gasoline, fuel oil, benzene, mineral spirits, and other hydrocarbons, dilute this concentrate to 3% using standard eductors or other proportioning systems. May also be stored premixed at the correct dilution. This fire foam concentrate is compatible with surfactants and tank protectors. Do no mix with alcohol or any other anti-freeze.
Store at temperatures above 35o F.
Gas and Oil Emulisyfying Agent
Emulsifying agent works on the principal of emulsification. It breaks down oil and gas into a detergent like solution. Small oil or gas particles are broken down and trapped... each solvent particle is actually coated with EMULSIFYING AGENT. The problem of oil and gas floating on top of water is eliminated. Flammable vapor is reduced. FEATURES:
- Cleans up spills
- Use in Sewers, ship bilges, harbors and marinas, holding ponds - anywhere there’s danger from gas, grease or oil spills
- Emulsifies spills to reduce hazards of fire and combustion
- Works on land and water to break down gas and oil spills
- Nonflammable
Street Push Brooms
These stiff street brooms tackle heavy municipal and construction waste. Bristles are imbedded in hefty hardwood blocks. Rugged construction coupled with abrasion resistant polypropylene bristle, or extra stiff natural bass fiber. Requires #191100, 60” wood tapered handle.
Catalog # and Description:
- A 338180 18” stiff yellow polypropylene, 4” trim
- B 339180 18” extra stiff brown polypropylene, 5” trim
- C 349160 16” extra stiff bass fiber, 6” trim